Nand plugin for v2.12.31

Avant Plugins

Important Note !
Do not make all plugin to AutoStart mode this can cause receiver to hangup
If the Coconut & Mcas is Started and Auto then do not start Wicardd

PAID Subscription Plugins

Download these plugins only if you have the subscription code otherwise it will be useless and take memory of the receiver for no reason

NASCAM SPCS

Configuration

  1. Press Menu
  2. Go to Plugin
  3. Go to SPCS
  4. Press Green key to start
  5. Press OK key to open
  6. Select Download Settings
  7. Select Mainsystem Worldwide
  8. Press EXIT key onetime
  9. Select Activation code
  10. Select Activate
  11. Type the Code and enter

AZCAM ULTRA

Configuration

  1. Press MENU
  2. Plugin
  3. AZCAM-ULTRA
  4. Press Green key to start
  5. Press OK key to open
  6. Type the Code and APPLY

AZCAM Blue

Configuration

  1. Press MENU
  2. Select Plugin
  3. Select AZCAM-BLUE
  4. Press Green key to start
  5. Press OK key to open
  6. Type the Code and APPLY

AZCAM Green

Configuration

  1. Press MENU
  2. Select Plugin
  3. Select AZCAM-GREEN
  4. Press Green key to start
  5. Press OK key to open
  6. Type the Code and APPLY

Plugin Description

 

  1. COCONUT
    This plugin is for Biss codes or CCW/DCW To Add Biss key start this plugin and go to any BISS channel and Press INFO+INFO+RED Enter BISS Code or Constant CCW / DCW press OK then exit, The channel should start working
  2. MCAS/MCLIENT
    Use this plugin to read Smart Cards or Patch Tandberg, PowerVU, Irdeto, Viaccess Start this plugin and press OK key to edit keys or configure the local card share server Mclient is for Sharing the Smart card of the Other Xcruiser model within same local network Start this plugin and press OK to enter the Mcas Server Details
  3. XcamClient1/XcamConfigure
    This plugin will connect the CCcam.cfg / Newcamd.list with server, paste the cccam.cfg or newcamd.list file in the receiver IP/root/var/etc folder and start this plugin, for manual configuration by remote control start the XcamConfigure plugin and enter all details, if it required any password then its 1407
  4. Xcam2
    This plugin is used for connecting CCcam/Newcamd/Mgcamd accounts with servers after starting this plugin press OK key to open the configuration menu
  5. Key_Redefine
    This plugin is helpful for changing live channels by press UP/DOWN keys in remote 
  6. Key Update
    Start this plugin by press green key to update the BISS keys and Mcas patch keys from server online
  7. Oscam (Opensource)
    Oscam do not have any menu on receiver, the configuration must be done by PC or Mobile WebBrowser, After starting this plugin open the webbrowser and type the receiver IP and Port example : 192.168.1.14:8888 and configure the Cccam/Newcam/Mgcamd etc… for more details about Oscam configurations check this link http://www.streamboard.tv/wiki/OSCam/en
  8. Wicardd (Cccam, Newcamd, Mgcamd, Biss key, Patch keys)
    Wicardd do not support receiver menu and webbrowser, to use the wicardd need to edit the wicardd.conf file. After downloading this plugin extract it first and then open the folder plugin => etc then open the WICARDD.CONF-SAMPLE file in Notepad and edit the Username/Password/Server/Port and the save it with name wicardd.conf, then install the plugin as usual by copy/paste plugin folder to USB and connect USB to receiver, wait for few seconds a window will popup then press the RED key to download To Monitor the connection status of wicardd open a webbrowser and type the receiver ip address with port like this 192.168.1.14:8888

IPTV Plugin

  1. M3U Playlist
    Rename the M3U file to xcruiser.m3u and copy to USB disk, connect USB to receiver
    Press Menu => IPTV+ => PLAYLIST => Press OK key => in URL type xcruiser.m3u and Connect
  2. EchooTV
    This is a Paid IPTV plugin press Menu => IPTV+ => ECHOOTV Press OK and enter the Code and connect